• Reading 0.001 mm
• IP65 Protection
• Buttons on/off, mm/inch zero
• CR2032 Battery
• It closes automatically
• Magnetic Base
• Auto Backlight to zero

Additional Information:

• Packaging Details: BOX

• With high power of emission and broad band of receiving sensitivity, the gauge can match probes of different frequencies.  
• Inbuilt self-calibrator and simple calibration function. 
• Automatic power off. 

Additional Information:

• Packaging Details: BOX

Additional Information:

• Production Capacity: 1 YEAR
• Delivery Time: 1 DAY

• User friendly menu operation with dot matrix display
• DC 5V/1A type C charging with 2000mAh battery
• Memory storage with each set of measured value, sound velocity, max, min and avg value. 
• Measure material sound velocity using 1 point calibration
• Option for silent operation and auto power off for conserving battery.

Insize 1106-501 is a digital caliper.

• Resolution: 0.01mm/0.0005″
• Button Functions: mm/inch, zero, on/off, ABS, data preset
• Battery CR2032.
• Data output.
• Made of stainless steel

• mpact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values
• External impact sensor (Type D) included
• Mobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the SAUTER HMM offers the highest level of mobility and flexibility
• All measurement directions possible (360°) thanks to an automatic compensation function
• Hardness test block for calibration included (790 ± 40 HL)
• Internal memory for up to 9 measurement values
• Mini statistics function: displays the measured result, the average value, the impact direction, date and time
• Measurement value display: (B and C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)
• Automatic unit conversion: The measuring result is automatically converted into all specified hardness units
• Infrared printer for direct output of the measuring results is included with delivery
• Delivered in a robust carrying case

• Graduation: 0.01 mm
• Micrometer head accuracy +/-3pm
• Rod accuracy, L is the measuring range in mm
• Rods with fiat end
• Ratchet stop

• Push and pull test
• Peak (max.) and tracking mode
• Units: mN, N, gf, kgf, ozf, lbf, MPa (only for type B)
• Tolerance testing
• 1000 memories
• Automatic power off
• Metal case, touch buttons
• LCD display with backlight
• The display flips over when the bottom faces up
• Overload alarm

• Center head (made of cast iron): to locate center of cylinders with
  a) Diameter (Ød): 30-100mm
  b) Accuracy +/-0.15mm
• Protractor head (made of cast iron): set the blade at desired angle to an edge of a workpiece, and can be used to
  a) Measure angles range: 0-180°
  b) Accuracy +/-20min.
• Square head (made of cast iron): set the blade at 90° or 45° to an edge of a workpiece
  a) Accuracy +/-8min for 90° square
  b) Accuracy +/-10min for 45° square
• Blade (made of stainless steel):
  a) Range 300mm/12″
  b) Graduation: 0.5mm and 1/32″ on front face, 1mm and 1/64″ on back face

Additional Information:

• Delivery Time: 1/2

• Separate light sensor for measuring at the most optimum position.
• Lux and FC units with range indicator. 
• Data hold and low battery indicator. 
• Optional PC data logging interface

Type of Product : Weld Gage
Size (mm) : 0-25 mm
Model No : 4835-1
Material : Stainless Steel

Additional Information:

• Production Capacity: NO LIMIT
• Delivery Time: 2
• Packaging Details: PLASTIC WITH WOODEN

• Shelf Life12 Months
• ColorBLACK
• Frequency60Hz

Additional Information:

• Production Capacity: NO LIMIT
• Delivery Time: 2 DAYS
• Packaging Details: CARDBOARD WITH THERMACOAL

• Easy-to-read digital display
• Automatically turns off after 10 minutes, and gives you fixed reference points for easy adjustment
• You can slide and clamp the measuring blade over the entire length
• You can make fine adjustments to precisely adjust arbitrary angle dimensions
• It comes with a mounting facility on height gauges and tracers of series 192 via holder

Additional Information:

• Delivery Time: RAEDY

Type Of Gauge: Thread Plug Gauge

Material: Stainless Steel

Brand: Nbeson

Usage/Application: Industrial

Country of Origin: Made in India

Features: High efficiency, Dimensionally accurate, Fine quality, Corrosion Resistanc

Gauge Include :-

• Large Display for better readability
• Zero-point calibration and multi-point calibration
• Two measure modes: single and continuous
• Selectable um/mil measuring unit

Additional Information:

• Packaging Details: box